Page 1 failed to load.
Lumpy3D - Palworld (2024) Game Hueforge - Patreon Exclusive
More from Lumpy3D
Lumpy3D - Osees "OFF COURSE" (2026) Album Hueforge - Patreon Exclusive
About This Title
Project: Palworld (2024) patreon.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.33x199.99mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Mistletoe Green Transmission Distance: 5
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Mistletoe Green
At layer #12 (1.04mm) swap to Orange
At layer #15 (1.28mm) swap to Jade White for the rest.
Project: Palworld (2024) patreon.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.33x199.99mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Mistletoe Green Transmission Distance: 5
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Mistletoe Green
At layer #12 (1.04mm) swap to Orange
At layer #15 (1.28mm) swap to Jade White for the rest.
Comments (0)