CritterCRAFT - Mini Ghost Clicker
infoAbout This Title
Halloween model #3 is a classic! TheCritterCRAFT halloween collection wouldn't be complete without a cute little ghost, and of course, one that clicks!
Model notes
Original, keychain, and coquette(bow) versions included, each in single-color and multicolor variations
Default slicer settings: 0.16 mm layer height , 15% infill, 3 walls
Mostly no supports - The tall dome/clicker connection inside the ghost body needs some support but it should remove easily with custom support paining I've done on the model. If you are using STL files in a different slicer, you will need to remove them manually or paint them in a similar way.
Use Variable Layer Height to improve details if you have time.
I used the Cherry MX-style keyboard switch found here: https://amzn.to/4e1o14C - Glue may be necessary to keep the switch and the body together.
When using the STL folders, be sure to load all parts of the model at once as an object with multiple parts to ensure correct sizing ratio, then scale the model up to the desired size. I recommended referencing the preset scale size % in the 3mf file even if you don't use Bambu Studio as your normal slicer. The seam is set to 'back'.
Filaments Used
Charcoal Black PLA Matte - Bambu
Ivory White PLA Matte - Bambu
Purple PLA Matte - Ender
Orange PLA Matte - Elegoo
Sakura Pink PLA Matte - Bambu
There is still more Halloween on its way! Happy printing!
Halloween model #3 is a classic! TheCritterCRAFT halloween collection wouldn't be complete without a cute little ghost, and of course, one that clicks!
Model notes
Original, keychain, and coquette(bow) versions included, each in single-color and multicolor variations
Default slicer settings: 0.16 mm layer height , 15% infill, 3 walls
Mostly no supports - The tall dome/clicker connection inside the ghost body needs some support but it should remove easily with custom support paining I've done on the model. If you are using STL files in a different slicer, you will need to remove them manually or paint them in a similar way.
Use Variable Layer Height to improve details if you have time.
I used the Cherry MX-style keyboard switch found here: https://amzn.to/4e1o14C - Glue may be necessary to keep the switch and the body together.
When using the STL folders, be sure to load all parts of the model at once as an object with multiple parts to ensure correct sizing ratio, then scale the model up to the desired size. I recommended referencing the preset scale size % in the 3mf file even if you don't use Bambu Studio as your normal slicer. The seam is set to 'back'.
Filaments Used
Charcoal Black PLA Matte - Bambu
Ivory White PLA Matte - Bambu
Purple PLA Matte - Ender
Orange PLA Matte - Elegoo
Sakura Pink PLA Matte - Bambu
There is still more Halloween on its way! Happy printing!
Comments (0)