Page 1 failed to load.
3DGOB - Flexi Snowmen & Christmas Tree container Design Showcase
More from 3DGOB
3DGOB - Flexi Husky, flexi Inuit & Arctic expedition Playset Design Showcase
About This Title
Hello, everyone! This year, we're kicking off the winter/Christmas season well ahead of schedule due to popular demand! Last year I really wanted to make snowmen, so that's the first thing I've made this year. I've also designed a Christmas tree using the same mechanism as the dragon eggs, to store any Christmas-themed designs. You can now download everything from the monthly folder! - https://www.patreon.com/3DGOB/posts/download-hub-114055526Most of the snowmen are 5 color prints. You can easily print them with a single 4 color system by swapping colors mid-print. My recommendation is that once the arm branches have finished printing, you change the brown to orange for the carrot—that way, you'll have another free color slot for the hats, and you have plenty of time to swap spools.There are two options for printing the Christmas tree. I really recommend the 4-color option if you have a printer that doesn't generate a lot of waste, because manually placing the 32 Christmas ornaments can be a challenge. Still, I've included this option in case anyone prefers it.The default size I'm sharing with you is 80% the size of a dragon egg. If you reduce the size too much, the closure mechanism might not work as it should.I hope you like this!FILAMENTS USEDOrange - Bambulab pumpkin orange basic PLABlue - Bambulab matte sky blue PLARed- Bambulab red basic PLATree yellow - esun gold PLA+Tree - Elegoo sea green PLA+RECOMMENDED PRINTING SETTINGS0.12mm layer height (as I mentioned previously, designs that are printed face up benefit greatly from low layer heights)Wall count: 2Infill: 15% gyroid
Hello, everyone! This year, we're kicking off the winter/Christmas season well ahead of schedule due to popular demand! Last year I really wanted to make snowmen, so that's the first thing I've made this year. I've also designed a Christmas tree using the same mechanism as the dragon eggs, to store any Christmas-themed designs. You can now download everything from the monthly folder! - https://www.patreon.com/3DGOB/posts/download-hub-114055526Most of the snowmen are 5 color prints. You can easily print them with a single 4 color system by swapping colors mid-print. My recommendation is that once the arm branches have finished printing, you change the brown to orange for the carrot—that way, you'll have another free color slot for the hats, and you have plenty of time to swap spools.There are two options for printing the Christmas tree. I really recommend the 4-color option if you have a printer that doesn't generate a lot of waste, because manually placing the 32 Christmas ornaments can be a challenge. Still, I've included this option in case anyone prefers it.The default size I'm sharing with you is 80% the size of a dragon egg. If you reduce the size too much, the closure mechanism might not work as it should.I hope you like this!FILAMENTS USEDOrange - Bambulab pumpkin orange basic PLABlue - Bambulab matte sky blue PLARed- Bambulab red basic PLATree yellow - esun gold PLA+Tree - Elegoo sea green PLA+RECOMMENDED PRINTING SETTINGS0.12mm layer height (as I mentioned previously, designs that are printed face up benefit greatly from low layer heights)Wall count: 2Infill: 15% gyroid
Comments (0)