matmire_makes - Exclusive: MMMini RoboBeetle (Clicker)!!
infoAbout This Title
Hi Everyone!
Introducing my new Subscriber Exclusive MMMini RoboBeetle!!
This MMMini marks a few firsts for me! It's my first Robo mini, which I've been wanting to explore for a long time. It's also my first Clicker design! I'm excited to add that to my toolbox for this and other future releases, where it makes sense.
The Standard version is 100% print-in-place, and requires no supports. Its a quick and easy print that scales down very well. The Clicker version requires a tiny bit of assembly, and must be printed at 100% scale to fit the Clicker mechanism. I've included both regular and keychain options for both versions!
Check out a little preview video HERE.
I hope you like it!Matt
*To Download: Click Here to go to the Pinned "the Hub - Info and Current Download Links" post
Pictured Prints use the following filaments***(reference the numbered prints in last image of the gallery)
(1) Snapmaker Engine Red, Ziro Silk Silver Grey, Sunlu Matte Gray, Snapmaker Matte Black, Bambu Bone White(2) Snapmaker Matte Yellow, iSanmate blue/purple, Eryone Matte Aqua Blue, Snapmaker Matte Sakura Pink(3) Ziro Silk Gold, Ziro Silver Silk, Ziro Red Silk, Snapspeed Black(4) Ziro Beach(5) Ziro Dreamy Dusk
I use Kailh Box White keyboard switches, these Keyrings, and these Magnets.
3D Print information:
MMMini RoboBeetle: -Standard version: Print-in-Place. (Can be scaled to print in different sizes)-Clicker version: Assemble Body and Shell with a Keyboard Clicker. (must be printed at 100% scale to fit the Clicker mechanism)
Both versions include regular and keychain options!
No supports needed.
Multicolor 3MF files: For PrusaSlicer, Bambu Studio, and Orca based slicers. (for Orca based slicers… it's often better to use File>Import rather than Open Project, so that it doesn't import any printer specific presets/settings.)
Magnet Cavities: Fits up to two stacked 10 x 3mm magnets.
10% Infill (I recommend Gyroid, Crosshatch or 3D Honeycomb)
3 Walls. (Assuming 0.4mm nozzle. Adjust wall count to account for alternate nozzle sizes)
Standard versions should generally scale down to about 50% with full articulation, on a well calibrated printer. Your mileage may vary. Clicker version should be printed at 100%
*To Download: Click Here to go to the Pinned "the Hub - Info and Current Download Links" post***Paid Links. As an Amazon Associate I earn from qualifying purchases.
Hi Everyone!
Introducing my new Subscriber Exclusive MMMini RoboBeetle!!
This MMMini marks a few firsts for me! It's my first Robo mini, which I've been wanting to explore for a long time. It's also my first Clicker design! I'm excited to add that to my toolbox for this and other future releases, where it makes sense.
The Standard version is 100% print-in-place, and requires no supports. Its a quick and easy print that scales down very well. The Clicker version requires a tiny bit of assembly, and must be printed at 100% scale to fit the Clicker mechanism. I've included both regular and keychain options for both versions!
Check out a little preview video HERE.
I hope you like it!Matt
*To Download: Click Here to go to the Pinned "the Hub - Info and Current Download Links" post
Pictured Prints use the following filaments***(reference the numbered prints in last image of the gallery)
(1) Snapmaker Engine Red, Ziro Silk Silver Grey, Sunlu Matte Gray, Snapmaker Matte Black, Bambu Bone White(2) Snapmaker Matte Yellow, iSanmate blue/purple, Eryone Matte Aqua Blue, Snapmaker Matte Sakura Pink(3) Ziro Silk Gold, Ziro Silver Silk, Ziro Red Silk, Snapspeed Black(4) Ziro Beach(5) Ziro Dreamy Dusk
I use Kailh Box White keyboard switches, these Keyrings, and these Magnets.
3D Print information:
MMMini RoboBeetle: -Standard version: Print-in-Place. (Can be scaled to print in different sizes)-Clicker version: Assemble Body and Shell with a Keyboard Clicker. (must be printed at 100% scale to fit the Clicker mechanism)
Both versions include regular and keychain options!
No supports needed.
Multicolor 3MF files: For PrusaSlicer, Bambu Studio, and Orca based slicers. (for Orca based slicers… it's often better to use File>Import rather than Open Project, so that it doesn't import any printer specific presets/settings.)
Magnet Cavities: Fits up to two stacked 10 x 3mm magnets.
10% Infill (I recommend Gyroid, Crosshatch or 3D Honeycomb)
3 Walls. (Assuming 0.4mm nozzle. Adjust wall count to account for alternate nozzle sizes)
Standard versions should generally scale down to about 50% with full articulation, on a well calibrated printer. Your mileage may vary. Clicker version should be printed at 100%
*To Download: Click Here to go to the Pinned "the Hub - Info and Current Download Links" post***Paid Links. As an Amazon Associate I earn from qualifying purchases.
groupArtist
matmire_makesverified
photo_library3 albums
visibility7.9K views
View Profile arrow_forward
Comments (0)